roduct line up

Transmission Parts ※Click picture to see larger image

Transmission parts 01 All shear・Fine blanking Thickness 4.5mm
Size 183mm
Material SAPH440
Usage Automatic Transmission (Clutch)
Remarks ・All shear in spline
・Flatness within 0.1mm
・OP deviation in spline within 0.02mm

Transmission parts 02 Thickness increase・Cold forging Thickness 4.5mm
Size 120mm
Material SPHC
Usage Automatic Transmission (Clutch)
Remarks ・Thickness increase in center portion
・Flatness within 0.05mm

Transmission parts 03 Clutch Thickness 3.2mm
Size 127mm
Material SPCC
Usage Automatic Transmission (Clutch)
Remarks ・Cylinder diameter range within 0.05mm
・Runout in cylinder within 0.05mm
・Cylinder diameter change after trimming within 0.1mm
・Developed new method to form cylinder without galling

Transmission parts 04 Deep Draw Thickness 3.0mm
Size 213mm
Material SAPH440
Usage Automatic Transmission (Clutch)
Remarks ・Runout on 8 legs less than 0.02mm
・Controlled diameter change in legs after trimming less than 0.2mm
・Controlled material thickness reduction and increase in entire part and controlled thickness range within 0.05mm

Transmission parts 05 Positive thickness reduction Thickness 2.1mm
Size 135mm
Material SPCE
Usage Automatic Transmission (Clutch)
Remarks ・Positive thickness reduction without cracking in cylinder (30% reduction)
・Flatness within 0.05mm
・Parallelism within 0.05mm

Transmission parts 06 Close tolerance stamping Thickness 2.0mm
Size 207mm
Material SPCD
Usage Automatic Transmission (Clutch)
Remarks ・Flatness within 0.1mm
・Thickness increase on outside flange bending radius
・OD size range within 0.02mm

Transmission parts 06 Close tolerance stamping Thickness 0.8mm
Size 149mm
Material SPCC
Usage Automatic Transmission (Clutch)
Remarks ・Holes in the cylinder made before forming without burr


Copyright(c) 2011 Lincoln Manufacturing USA,LLC. All Rights Reserved.